SS-11
MODEL : SS - 10
ALL IN ONE - LCD - SASD Starter with Phase Converter, Auto Start & Mobile Converter
Description
Compact solution for all 3 phase SASD Motors from 7.5 to 25 HP. This starter can work in 3 phase / 2 phase / juice condition while providing complete protection from unstable field conditions and current fluctuations
Variants
Salient Features
- Auto Start Timer (1-600 Sec)
- Cycle Timer (Adjustable)
- Dry Run Protection (Adjustable)
- High & Low Voltage Protection (Adjustable)
- Over Load Relay (Adjustable)
- Phase-to-Phase Unbalance Load Protection
- Rotor Lock Protection
- SASD Timer (1 - 60 Sec)
- Single Phase Protection (LT & HT)
- Voltage & Current Sensing
Mobile Controller Features
- Switch ON / OFF via Missed Call
- Switch ON / OFF via SMS
- Field Condition Feedback via SMS
- Power ON / OFF Status Alerts via SMS
- Technical Fault Alerts via SMS
- Remote Configuration via SMS
- Steps to use
- Step 1: Open SIM Card Cap gently with a tester / screwdriver
- Step 2: Insert SIM Card gently in SIM Tray and push to lock
- Step 3: Register Your Mobile Number: Send an SMS *start to the SIM number
- Step 4: To switch ON the motor, Dial Sim No & Disconnect after 2 Rings
- Step 5: To switch OFF the motor, Dial Sim No & Disconnect after 5 Rings
Note
This unit is compatible only with SSS Gold Starters
This unit does not support JIO SIM Card
Condenser Chart
| HP | T1 - T2 | T3 - T4 | R1 - R2 | VOLTAGE |
|---|---|---|---|---|
|
7.5/8 |
200/250 |
50 |
50+50 |
440 – V |
|
10/12.5 |
200/250 |
50 |
50+50+50 |
440 – V |
|
15 |
200/250 |
50 |
50+50+50 |
440 – V
|
|
17.5 |
200/250 |
50 |
50+50+50 |
440 – V |
|
20 |
200/250 |
50 |
50+50+50 |
440 – V |
|
25 |
200/250 |
50 |
50+50+50 |
440 – V |
Specifications
| Details | ||||
|---|---|---|---|---|
|
Brand |
SSS Gold |
|||
|
Colour |
Grey |
|||
|
Packing Contents |
1 Starter |
|||
|
Current Type |
3 Phase / 2 Phase / Juice |
|||
|
Compatibility |
All 3 Phase SASD Motors upto 25 HP |
|||
|
Operation Method |
Manual, Auto Mode & Mobile Controller |
|||
Relay Range
| Details | ||||
|---|---|---|---|---|
|
7.5/8 HP |
8-25 |
|||
|
10/12.5 HP |
20-40 |
|||
|
15 HP |
30-50 |
|||
|
17.5 HP |
35-60 |
|||
|
20 HP |
40-70 |
|||
|
25 HP |
50-80 |
|||